All CATAGORY
Creality Official 3D Printer Parts HALOT-SKY/LD-006 FEP Release Film 1 PCS 266×190×0.15mm Heat Resistance for HALOT-SKY/LD-006
Specification
Product name: LD-006 FEP Release Film
Product size: 330*245mm
Product color: Transparent color
Flatness: 0.001mm
Applicable model: LD-006
Gross weight: 92g
Net weight: 20g
Packing list:1pcs
Suitable for:LD-006/HALOT-SKY/HALOT-LITE/HALOT-SKY/HALOT SKY 2022
Seven advantages elaborate craft
1. High ductility: 300% of ductility
2. Good flexibility: 10,000 bend tests
3. Heat resistance: Withstand 200℃ for a long time
4. Stable release force: Coating uniformity
5. High cleanliness: Production in no-dust workshop
6. Smooth surface: No wrinkles, scratches and bubbles
7. High transmittance: Transmittance exceeds 95%
FEP resin with high purity: FEP release film for 3D printer is a casting film of melt extrusion and made of high purity FEP
resin(vinyl chloride propylene copolymer). It has good non-viscosity, heat resistance, electrical insulation, mechanical properties,
wear resistance, etc.
High transmittance: The 3D release film has high transmittance, and the UV transmittance is over 95%, which makes the printed
products more perfect and provides product quality.
Stable release force stand wear and tear: This release film with coating uniformity and stable force has efficient separation for
most resins; It has smooth surface, no wrinkles, scratches and bubbles, which meets release requirement of various products and
can be used repeatedly.
Good flexibility excellent ductility: Excellent ductility is up to 300% and good flexibility can bend 10,000 times.
Installation steps
a. First, remove 14 screws at the bottom of resin vat and take out the broken release film
b. Then place the release film between two steel rims
c. Finally, put the installed steel wheel back into resin vat and tighten 14 screws
d. The installed release film is shown in picture d
