All CATAGORY
â‘ . LED displays time, month, day and seconds.
â‘¡, 12-hour clock, single-press chain operation.
â‘¢. In power saving mode, if there is no key press within 3 seconds, the screen display will turn off automatically.
2.mode selection
â‘ . Press the button first to display the startup screen.
â‘¡. Click the buttons sequentially to view (hour/minute), date (month/day), and seconds.
â‘¢Note: The small dot display in front of the hour indicates the ”PM” time hall.
3.Data settings
Note: When the test time, minute, year, and the first function are adjusted, press 3 seconds to continue debugging the next function. Do not let go for too long, otherwise it will return to the original startup screen and have to start again. Sorry, this manual is for models A and B.
â‘ . Press and hold the button for 3 seconds to enter the setting mode when ”time is displayed”
The ”clock” number flashes. When the ”clock” number flashes, release the button, press the button, and adjust the current value. After the clock is adjusted.
â‘¡. Continue to press the button for 3 seconds, ”minute” will flash, ”minute”
When it flashes, release the button and press the button to adjust the current value. After the minutes are adjusted.
â‘¢. Continue to press the button for 3 seconds. When the ”YOO” (Y represents the year) number flashes, release the button, press the button to adjust the current value, and adjust the year by pressing the touch position of the button.After getting better.
â‘£Continue to press the button for 3 seconds and ”the month starts flashing”. When the ”month” number flashes, release the button. Press the button again to debug the current value and the month is adjusted.
⑤. Continue to press the button for 3 seconds and ”the date starts flashing”. When the ”date” number flashes, release the button, press the button, adjust the current value, and adjust the date. Stop pressing the keys, complete the project settings after 5 seconds, and return to the time interface.
! ! Note: When debugging time, minute, year, after adjusting the first function, press 3 seconds to continue debugging the next function. Do not let go for too long, otherwise it will return to the original startup screen and you will have to adjust it again.
