All CATAGORY
Model 1:
OBD2 Emulator For MAN Euro6 Truck Diagnostic Scanner
Especially For MAN Truck
obd2 Emulator for MAN Euro6 is specially for Man Truck Euro6
After installing Euro6 Emulator, you can remove:
D sensors – YES
N sensor – YES (only in D don’t remove first N sensor !!!)
temp. sensor (s) – YES
pump – YES
level sensor – YES
ECU – YES
Kindly note:
It is possible to disable system by installing an emulator (programmable device) into the vehicle. You can switch it on/off anytime.
EURO6 Emulators using guide:
Emulator FOR Man Euro 6 does not need to be learned. You install emulator under the metal cover of ump on the right side behind the cab, and disconnect plug from Pump and connect emulator.
Next, you need to remove the fuses:
F894(Multisensor In tank)
F738 (+30 Signal of pump)
F1084 ( sensor Upstream)
Fuse F737 is now fuse of emulator.
Fuse F1109 is the fuse of sensor Downstream and A1191 mufler temperature sensor. This sensor needs to work correctly for DPF regeneration.
Finally, you need to remove Power from downstream sensor. There are two ways options, one is to cut pin 1 in sensor plug, the other way (better) is to remove pin 10 in X3212 plug. This plug is visible on rear of engine on the right side. This is TE plug (16 pin) with yellow key.
Model 2:
Emulator For CUMMINS Truck Diagnostic Scanner
Especially For CUMMINS Truck
The emulator allow to disable S system on trucks with for Cummins and system Emitec, Grundfos and BOSCH Denoxtronic, no need computer programming, it is a plug and drive device.
For Trucks(Engine brand must be for Cummins)
*DAF LF
Chinese Trucks:
*CAMC
*FAW
*AVIA
*HAGER
*KINGLONG
*YOTONG
Vehicle List ( not need computer programming )
ISG12 Euro IV/V
ISF3.8 for Light Commercial
ISF2.8 for Light Commercial
ISMe for Euro Truck & Bus
ISL for Euro Truck & Bus
ISB6.7 for Euro Truck & Bus
ISB4.5 for Euro Truck & Bus
ISL G for Euro Truck & Bus
B Gas Plus (Euro 5)
C Gas Plus (Euro 3 & 4)
ISB5.9 G for Euro Truck & Bus
Packing List:
1pc x Commins emulator
1pc x euro3 socket
1pc x euro4 socket
1pc x socket
OBD2 For MAN EURO6 Emulator:
OBD2 For CUMMINS Emulator:
