All CATAGORY
Anti-jamming Car Reversing Rectifier Ballasts Solve Rear Power Filters View Camera Ripple Splash Screen for Audi for VW/SKODA
Feature:
1.Some models of German cars and American cars are, after engine start, output voltage interferences, power supply to the reversing lights are not pure DC power supply, but a pulse signal is superimposed on top oscilloscope can be used to test if the conditions will It found a similar square wave signal. Camera power supply line directly on the down lights, because the working voltage is very unstable cause the camera does not work properly, the video signal output is also not normal, so the host can see there is a severe interference, jitter, or not to switch reversing the screen.
2. Reversing ballast is the solution to your reversing camera interference ripple best choice.
3.Effective solution to reversing the situation or reversing black water ripples, wiring simple, German cars and model year old car essential artifact.
Installation Method:
Blue cable: Connect the positive electrode of the camera power supply (camera red wire)
Red cable: Connect the positive pole of the reverse headlight
Black cable: Connect the negative pole of the reverse lamp or Ground
Kind reminder: Please do not take photos of the display device of the dash cam as it is not compatible. Please do not purchase non German or American cars. Citroen does not support French car models as different cars have different current signals and interference from non pulse signals. Using this rectifier is ineffective! (Please take a photo of our relay for the recorder, it can solve the problem.)
