All CATAGORY
Key Features
-
Streak-free Repair: The dent repair tool can flameless heat the panel behind the paint from the outside of the panel, and the body is restored to its pre-deformed position by induction heating expansion, which is not harmful to the paint.
-
Good Heat Dissipation: The induction heater has multiple heat dissipation ports at the back and bottom, which can effectively dissipate heat and prolong the service life of the machine.
-
Precise Repair: The induction heater with adjustment buttons, you can select the right power by the up or down button to repair different degrees of dents more precisely.
Details
-
Digital Screen: The induction heater with a quality display screen, you can choose to display the time or power through the selection button, easy to control the working status of the heater at any time.
-
Insulated Heating Head: The heating head is made of insulating material, so you will not be electrocuted or scalded when using it, making it safe to use and more secure.
Application
-
This product can be used to repair dents on steel car bodies. It is suitable for garages, or personal use.
Specification
-
Input Power: 110V-120V
-
Input Frequency: 50/60Hz
-
Output Power: 1.38KW
-
Output Frequency: 150KHz
-
Power Output Cable: 160cm/299.21inch
-
Product Size: 13.5*25*7.5cm/5.3*19.84*2.95inch
-
Case Size: 31*32.5*16 cm/12.2*12.8*6.3inch
-
Package Size: 32*32*16cm/12.6*12.66.3inch
-
Gross Weight: 4kg/8.82lbs
Package Included
-
1 x Induction Heater
-
1 x Cable
-
1 x Power Cord
-
5 x Candles
-
1 x Hammer
-
1 x Suitcase
-
1 x English Manual
-
All Accessories for Use
How to Use
-
Move the heating head around the dent and check the changes. gradually move into the dent center.
-
Press the button at each heating spot for1-2 times
-
After the previous processes are done, a dent will be reduced less than the heating head, put the heating head above the dent and heat again, but using less power or heating time.
-
Put the heating head near the dent and heat again several times.
Notes
-
To avoid causing damage to surface painting, do not apply heating on a single dent for a long time.
-
After 3-5 times heating, use a wet towel to reduce surface temperature.
-
Do not let the heating head touch the surface painting, leave a gap of 3-5mm.
-
During the heating process, the painting surface becomes soft, applying pressure on the surface will increase the dent.
-
Please read the model of this product carefully and make sure it fits your model before buying. Please understand that we will not accept a return request because of this.
-
Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.
