Huepar Laser Level Green Beam Self-Leveling Cross Line Laser Level Tool With 2 Plumb Dots,Backup Batteries And Hard Case

Huepar 7211CG 360°Green Beam Laser Level Specifications:

Laser Class: Class 2 (IEC/EN60825-1/2014), <1mW power output

Laser Wavelength: 505-520nm

Horizontal/Vertical Accuracy: ±1/9" at 33 Ft.

Plumb Dot Accuracy: 1/9" at 33 Ft.

Leveling/Compensation Range: ±3.5°

Working Distance (Line): 130Ft.(100 LUX) ,197Ft. with Huepar Line Laser Receiver

Operating Time: 10 hours with all laser beams on

Power Source: 7.4V / 1500mAh Li-ion Battery

IP Rating: IP54

Operation Temperature Range: 32℉ ~ 104℉ (0℃~ 40℃)

Mount Size: 1/4"-20

WARNING:

Avoid direct exposure of the laser beam to the eyes.

Package Contents-2 Batteries with Laser level

1 x Huepar 7211CG 360°Self-leveling Green Laser Level

1 x 360° Magnetic Pivoting Bracket

2 x Rechargeable Li-ion Battery with Type-C Charging port

1 x Type-C Power Cord

1 x Power Adapter

1 x Laser Target Plate

1 x Hard Carrying Case

1 x User Manual

Multiple Line Switching Functions

This professional cross-line laser projects one 360° Horizontal and one 140° Vertical lines for all-around leveling coverage, even in big job-site.

This laser level also projects green up & down centered points on the floor and ceiling.

Three laser line modes can be freely selected independently: All Lasers on, 360° Horizontal line, Vertical line and up & down plumb points.

Li-ion Battery with Type-c charging port

This laser tool utilizes the included large capacity of 7.4V / 1500mAh Li-ion battery and provides up to 10 hours of running time.

The Li-ion battery with the Type-C charging port can be charged separately.

And the Li-ion battery can also be charged by laptop, power bank, car charger, etc.

Smart Pendulum – Self-leveling Mode & Manual Mode

Self-leveling Mode:

When the laser tool is switched to the unlocked position, the self-leveling mode is enabled.

The laser beam will flash when the tool is beyond self-leveling range ± 3.5°.

Manual / Tilt Mode:

When the pendulum locked, the laser tool can be placed for alignment at any angle.

The laser beam will blink every 3-5 seconds to remind you that it's not self-leveling now.

Pulse Mode

Turn ON pulse mode: After power on, long press the Pulse Mode button to turn on the pulse mode. The indicator will light up in red.

When the pulse mode turned on, the laser tool can be used with Huepar Line Laser Receiver to extend working distance up to 197ft.

It is compatible with Huepar LR-6RG / LR-5RG Laser Detector only.

Note: Keep the pulse mode on when using with a receiver.

Brightness Adjustment

Visibility adjustment function enables users to select the line brightness in different light conditions.

There are three levels of brightness adjustment.

After power on, short press the power button to switch the brightness and the LIGHT indicator will flash in red.

Multiple Installation Methods

The self-leveling laser level comes with 1/4"-20 thread to suit for standard tripod or laser mounting pole.

The included 360° strong magnetic pivoting base allows for attachment to metal track and steel，supporting to turn the level tool around at 360 degree.

And the 1/4"-20 mounting thread on the magnetic bracket helps mount it to a standard tripod.

Hard Carrying Case & Durable Design

The kit has a hard carry case bringing much more convenience to carry and store the laser tool.

Over-molded laser window withstands hazardous job site conditions and can be removed and replaced with a screwdriver.

IP54 waterproof and dustproof, shockproof, wear resistant, impact resistance, cold and high temperature with stands tough worksite conditions, making it more reliable to use.