All CATAGORY
Huepar ZK04CG-L 4D 16 Lines Laser Level ±2mm High Accuracy Green Beam Self-leveling Cross Line Laser with 8000mAh Li-ion Battery
Package Contents:
1x ZK04CG Laser Level
1x 8000mAh Li-ion Battery
1x PV3 Bracket
1x Remote Control
1x Lifting Base
1x Green Target
1x Type-C Power Cord
1x Hard Carry Case
1x User Manual
Huepar ZK04CG-L 4 x 360 2±mm/10m Accuracy Green Laser Level Specifications:
Laser Level: Class 2, < 1mW power output
Laser Plane: Two 360° horizontal laser planes and two 360° vertical laser planes
Horizontal/Vertical Accuracy: 1/13 inch at 33 ft.
Laser Wavelength:505-520nm
High Brightness Green Laser
Leveling/Compensation range: ±3°
Working Distance (Line): 100Ft (100 LUX), 200Ft. with Huepar Receiver LR-5RG/LR-6RG
Power Supply: 5V2A/ 8000mAh Li-Ion battery, 8 hours of operating time with all four laser beams on.
Protection Rating: IP54 Rustproof, Waterproof, Shockproof, Reliable, Sturdy
Package: Hard Carrying Case
Mount Size: 1/4"-20
Huepar ZK04CG-L 4 x 360 2±mm/10m Accuracy Green Laser Level Feature:
High Accuracy ±2mm/10, ±1/13 inch at 33Ft From a large number of laser level modules, high precision modules are selected and specially tuned by hand to produce a laser level with an accuracy of 2mm at 10m.The percentage of high-precision modules in the total number of modules is only 10%.Short press the "H" and "V" buttons on the keypad to switch the Horizontal and Vertical laser lines separately.
The remote control enables to select the 4 x 360° laser lines individually at a distance up to 32.8Ft.The laser line(s) can be temporarily turned OFF by the remote control when need to leave for a while.
Line Switching Short press the "H" and "V" buttons on the keypad to switch the Horizontal and Vertical laser lines separately.The remote control enables to select the 4 x 360° laser lines individually at a distance up to 32.8Ft. The laser line(s) can be temporarily turned OFF by the remote control when need to leave for a while.
8 Hours Working Time With all beams on 8000mAh rechargeable Li-ion battery support the laser level to work for 8 hours with all four 360° laser beams on.Type-C charging port can be used to charge the battery through car charger, rechargeable treasure and other ways.Battery indicators let you know the power status at any time.
Self-leveling & Manual Mode Self-leveling mode: Unlock the pendulum, and enable the self-leveling mode, when the tool exceeds the self-leveling range by ±3°.The laser beam(s) will blink about every 3-5 seconds to notify the user it is not self-leveling now.Manual mode:Once the pendulum is locked, it switches to manual mode, the self-leveling function is disabled, the cross laser tool is locked, and you can position the laser level at any angle you need.
Outdoor Pulse ModeTurn ON the pulse mode: After powering ON, short press the "Pv" button to turn ON/OFF the pulse mode. When the pulse mode is activated, the laser beams are dimmer.Pulse mode extends the working range up to 40-60m in brighter working conditions when using with Huepar Line Laser Detector(LR-8RG/LR-5RG/LR-6RG) .
Strong magnetic bracket The ZK04CG uses with 180 degree magnetic bracket, it is easy and convenient for you to use.The mount size for this device is 1/4"-20 mount thread, it can be mounted to a tripod or other adapter also.
360° Horizontal Floor Laser & Lifting BaseThis tiling laser tool generates one 360° horizontal floor laser at the bottom that can hit a 1/2 inch ultra-low horizontal line on the ground, prefect for the layout of tile, stone, brick, carpet and hardwood flooring, etc.With the lifting base, the laser lines raise from the surface between 0.83 inch and 3.2 inch height.
Use of different scenarios: Construction work, window installation, wall tiling, stair laying and so on.
