All CATAGORY
Feature:
1. 1/18 scale model Rc Car
2. lighting adopts simulation linkage lights, the third channel control of the net spotlights.
3. the power adopts high torque external carbon brush black motor, 20A waterproof brush electric adjustment,
so that the car can break out to strong output, low linear posture, can run and climb.
4. the chassis clearance from the ground is high, as well as increasing the tires, widening the bridge, increasing the stability of the body, but also more operational and off-road capabilities.Product configuration: Simulated Climbing Wrangler
Product Material: Hardware; Electronics; plastic cement
Product size: 26 * 13 * 12CM
Vehicle battery: 7.4V 600mAH lithium-ion battery (JST red head)
Control time: 40 minutes
Remote control battery: 4 AA batteries (not included)
Charging time: 2 hours (USB balanced charging)
Charger: USB 1000MA charging cable
Frequency: 2.4GHz (supports multiple vehicles competing in the same field)
Remote control distance (meters): 100 meters
Motor: External carbon brush 370
Servo: 9g metal gear servo
Speed: 12 kilometers per hour
Wheelbase parameters: Wheelbase: 150mm; Track width: 110mm; Wheel diameter: 60mm;
Lamp configuration: LED headlights, LED front turn signals, LED rear turn signals
Differential structure: Direct difference
Protection function: 1. Charging; 2. Stuck; 3. High temperature; 4. Low voltage“
1. As a small-scale model, it continues the details of the Wrangler simulation in terms of appearance;
2. In terms of lighting, simulation linked headlights are used, with a third channel controlled grille spotlight (5-speed mode: constant light, flowing light, fast flash, slow flash, left and right flash);
3. The power adopts a high torque external carbon brush black leather motor, with 10A waterproof and brush electric adjustment, which allows the car to generate strong output power and low linear posture, allowing for running and climbing;
4. The high ground clearance of the chassis, as well as the enlargement of tires and the widening of the integrated axle, have increased the stability of the vehicle body, as well as enhanced maneuverability and off-road capabilities;
5. The ABS car shell with complete details adopts a quick detachable non shell clip design, and has complete simulation details including spare tire, trailer hook, rearview mirror, door wrench, wiper, etc., with a higher degree of detail simulation. JJRC has prepared a variety of original modification parts for players to DIY their own cars, allowing them to immediately enjoy the walking and modification fun brought by simulation climbing;
6. The metal beam structure and four link front and rear suspension provide excellent walking performance both indoors and outdoors;
7. The reinforced 9g high torque metal gear servo and waterproof electronic device allow this small car to walk around the clock;
8. Equipped with a smooth throttle control, the steering angle reaches 45 degrees, and the turning radius is reduced by 50% compared to the same proportion of models, allowing the car to easily turn and turn even in indoor spaces, with higher flexibility.
Size：26*13*12CM
Charging time: about 2 hours
Remote control battery: 1.5V AA battery*4 (not included)
Body battery: 7.4V lithium battery JST plug
Using time: about 40 mins
Driving speed: about 12km/h
Remote control distance: 100 Meters
Driving motor：Carbon brush 370
