Storage Expansion Board SPI Micro SD TF Card 5V 3.3V Memory Shield Module 6 Pins Mini TF Card Module for Arduino DIY Kit
Feature:
1. High-Speed Transfer: The micro SD module supports high-speed data transfer standards such as SDHC, allowing for faster data read and write speeds to meet the demands of high-performance storage.
2. Convenience: Using the storage expansion board allows for easy expansion of device storage capacity without the need to replace the entire internal memory. Users can insert and remove Micro SD cards as needed, conveniently managing and sharing data.
3. Wide Application: The micro SD TF card is suitable for a variety of devices and applications, including smartphones, tablets, digital cameras, microcontroller development boards, and more. It features a standard SPI interface with a positioning hole, making installation convenient.
4. Versatile Compatibility: The memory shield module typically supports various file systems, making it compatible with different operating systems such as Windows, macOS, Linux, and Android. This ensures seamless integration and compatibility across multiple platforms.
5. Reliable Storage: Mini TFcard modules are known for their reliability and durability, making them an ideal choice for storing important files, documents, photos, and videos. The Micro SD module provides a secure and stable storage solution, protecting valuable data from loss or corruption.
Specification:
Origin: Mainland China
Type: Module
Condition: New
Features:
Support Micro SD card, Micro SDHC card (high speed card)
Level conversion circuit board, can interface level 5V or 3.3V
Communication interface is a standard SPI interface
Control interface: a total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND ground.
GND is grounded, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, and CS is the chip select signal pin;
3.3V voltage regulator circuit: LDO regulator outputs 3.3V as the power supply for level conversion chip and Micro SD card;
Level conversion circuit: Micro SD card direction signal is converted to 3.3V, MicroSD card direction control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;
Micro SD card connector: Yes, because the bomb deck allows easy insertion and removal of the card.
Positioning holes: 4 M2 screw positioning holes 2.2mm in diameter, easy to install and position for inter-module combination;
Power supply: 4.5V – 5.5V, 3.3V regulated circuit boards
Positioning hole: M2 screw positioning hole diameter 2.2mm
Control Interface: GND, VCC, MISO, MOSI, SCK, CS
Product Size: 18.00×17.00×3.00mm/0.71×0.67×0.12inch
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Storage Expansion Board SPI Micro SD TF Card 5V 3.3V Memory Shield Module 6 Pins Mini TF Card Module for Arduino DIY Kit
Feature:
1. High-Speed Transfer: The micro SD module supports high-speed data transfer standards such as SDHC, allowing for faster data read and write speeds to meet the demands of high-performance storage.
2. Convenience: Using the storage expansion board allows for easy expansion of device storage capacity without the need to replace the entire internal memory. Users can insert and remove Micro SD cards as needed, conveniently managing and sharing data.
3. Wide Application: The micro SD TF card is suitable for a variety of devices and applications, including smartphones, tablets, digital cameras, microcontroller development boards, and more. It features a standard SPI interface with a positioning hole, making installation convenient.
4. Versatile Compatibility: The memory shield module typically supports various file systems, making it compatible with different operating systems such as Windows, macOS, Linux, and Android. This ensures seamless integration and compatibility across multiple platforms.
5. Reliable Storage: Mini TFcard modules are known for their reliability and durability, making them an ideal choice for storing important files, documents, photos, and videos. The Micro SD module provides a secure and stable storage solution, protecting valuable data from loss or corruption.
Specification:
Origin: Mainland China
Type: Module
Condition: New
Features:
Support Micro SD card, Micro SDHC card (high speed card)
Level conversion circuit board, can interface level 5V or 3.3V
Communication interface is a standard SPI interface
Control interface: a total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND ground.
GND is grounded, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, and CS is the chip select signal pin;
3.3V voltage regulator circuit: LDO regulator outputs 3.3V as the power supply for level conversion chip and Micro SD card;
Level conversion circuit: Micro SD card direction signal is converted to 3.3V, MicroSD card direction control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;
Micro SD card connector: Yes, because the bomb deck allows easy insertion and removal of the card.
Positioning holes: 4 M2 screw positioning holes 2.2mm in diameter, easy to install and position for inter-module combination;
Power supply: 4.5V – 5.5V, 3.3V regulated circuit boards
Positioning hole: M2 screw positioning hole diameter 2.2mm
Control Interface: GND, VCC, MISO, MOSI, SCK, CS
Product Size: 18.00×17.00×3.00mm/0.71×0.67×0.12inch
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Storage Expansion Board SPI Micro SD TF Card 5V 3.3V Memory Shield Module 6 Pins Mini TF Card Module for Arduino DIY Kit
Feature:
1. High-Speed Transfer: The micro SD module supports high-speed data transfer standards such as SDHC, allowing for faster data read and write speeds to meet the demands of high-performance storage.
2. Convenience: Using the storage expansion board allows for easy expansion of device storage capacity without the need to replace the entire internal memory. Users can insert and remove Micro SD cards as needed, conveniently managing and sharing data.
3. Wide Application: The micro SD TF card is suitable for a variety of devices and applications, including smartphones, tablets, digital cameras, microcontroller development boards, and more. It features a standard SPI interface with a positioning hole, making installation convenient.
4. Versatile Compatibility: The memory shield module typically supports various file systems, making it compatible with different operating systems such as Windows, macOS, Linux, and Android. This ensures seamless integration and compatibility across multiple platforms.
5. Reliable Storage: Mini TFcard modules are known for their reliability and durability, making them an ideal choice for storing important files, documents, photos, and videos. The Micro SD module provides a secure and stable storage solution, protecting valuable data from loss or corruption.
Specification:
Origin: Mainland China
Type: Module
Condition: New
Features:
Support Micro SD card, Micro SDHC card (high speed card)
Level conversion circuit board, can interface level 5V or 3.3V
Communication interface is a standard SPI interface
Control interface: a total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND ground.
GND is grounded, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, and CS is the chip select signal pin;
3.3V voltage regulator circuit: LDO regulator outputs 3.3V as the power supply for level conversion chip and Micro SD card;
Level conversion circuit: Micro SD card direction signal is converted to 3.3V, MicroSD card direction control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;
Micro SD card connector: Yes, because the bomb deck allows easy insertion and removal of the card.
Positioning holes: 4 M2 screw positioning holes 2.2mm in diameter, easy to install and position for inter-module combination;
Power supply: 4.5V – 5.5V, 3.3V regulated circuit boards
Positioning hole: M2 screw positioning hole diameter 2.2mm
Control Interface: GND, VCC, MISO, MOSI, SCK, CS
Product Size: 18.00×17.00×3.00mm/0.71×0.67×0.12inch
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Storage Expansion Board SPI Micro SD TF Card 5V 3.3V Memory Shield Module 6 Pins Mini TF Card Module for Arduino DIY Kit
Feature:
1. High-Speed Transfer: The micro SD module supports high-speed data transfer standards such as SDHC, allowing for faster data read and write speeds to meet the demands of high-performance storage.
2. Convenience: Using the storage expansion board allows for easy expansion of device storage capacity without the need to replace the entire internal memory. Users can insert and remove Micro SD cards as needed, conveniently managing and sharing data.
3. Wide Application: The micro SD TF card is suitable for a variety of devices and applications, including smartphones, tablets, digital cameras, microcontroller development boards, and more. It features a standard SPI interface with a positioning hole, making installation convenient.
4. Versatile Compatibility: The memory shield module typically supports various file systems, making it compatible with different operating systems such as Windows, macOS, Linux, and Android. This ensures seamless integration and compatibility across multiple platforms.
5. Reliable Storage: Mini TFcard modules are known for their reliability and durability, making them an ideal choice for storing important files, documents, photos, and videos. The Micro SD module provides a secure and stable storage solution, protecting valuable data from loss or corruption.
Specification:
Origin: Mainland China
Type: Module
Condition: New
Features:
Support Micro SD card, Micro SDHC card (high speed card)
Level conversion circuit board, can interface level 5V or 3.3V
Communication interface is a standard SPI interface
Control interface: a total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND ground.
GND is grounded, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, and CS is the chip select signal pin;
3.3V voltage regulator circuit: LDO regulator outputs 3.3V as the power supply for level conversion chip and Micro SD card;
Level conversion circuit: Micro SD card direction signal is converted to 3.3V, MicroSD card direction control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;
Micro SD card connector: Yes, because the bomb deck allows easy insertion and removal of the card.
Positioning holes: 4 M2 screw positioning holes 2.2mm in diameter, easy to install and position for inter-module combination;
Power supply: 4.5V – 5.5V, 3.3V regulated circuit boards
Positioning hole: M2 screw positioning hole diameter 2.2mm
Control Interface: GND, VCC, MISO, MOSI, SCK, CS
Product Size: 18.00×17.00×3.00mm/0.71×0.67×0.12inch
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
All CATAGORY
