All CATAGORY
Basic parameters:
Material: High density EPO, PLA additive
wingspan: 1300mm
Body length: 972mm
Wing load: 58g/dm²
Wing area: 22.5dm²
Takeoff weight: 1300g
Blade size: 8×5″
electric machinery: 2212-KV1400
Electric tuning: 40A
steering engine: 9g metal servo * 5
Duration of flight: 10-30 minutes
Other electronic devices:/
Channel Introduction: 4CH aileron, lift, throttle, direction
Battery size: 140X35X35mm (length x width x height)
Recommended lithium batteries: 4S 2600-3300mAh, 21700 4S1P-5000mAh (21700-4S2P-10000 expandable)
Assembly and debugging time:~15 minutes
PNP does not have a battery charger, remote control, or receiver.
This product is a remote control model and poses a high level of danger when operated improperly. Remote control model installation, debugging, and flight require corresponding remote control model knowledge.
1. Model airplanes are not toys, and operators need to have certain operational experience. Inexperienced beginners should gradually learn under the guidance of experienced professionals
The applicable age for model aircraft must be children or adults over 14 years old.
3. Do not fly in thunderstorms, strong winds, heavy snow, or other harsh environments
4. Battery products for model airplanes should not be thrown or placed randomly. When storing, it is necessary to ensure that there are no flammable or explosive objects within a 2-meter radius.
5. Damaged or scrapped model aircraft batteries should be properly recycled and not discarded at will. Prevent spontaneous combustion from causing fires.
6. When flying in the airport, the waste generated after the flight should be properly disposed of, and the model and its accessories should not be discarded or burned at will.
7. In any case, it is necessary to ensure that the throttle lever is in the starting position and the transmitter is in the open state before connecting the power battery inside the model aircraft.
8. Do not attempt to retrieve the model by hand, whether it is during normal flight or during slow landing. We must wait for the model to land and stabilize before proceeding with the recovery!
9. foam aircraft products cannot be exposed to the sun. Exposure to the sun may cause foam blistering, body deformation and other undesirable phenomena.
